Best Trailer Lighting Comparisons and Specifications
MaxxHaul
- Kit includes stop, tail and turn signal lights, two amber clearance lights and wiring harness
- Includes 23 and 4 foot 4-pole color coded wiring harness. Product Type: Lighting and Electrical
- High visibility LED taillights last longer than standard incandescent lights
- Complies with DOT standards; Side lens are with standard bulb. Corrosion resistant housing. For trailers less than 80 Inch wide
- Includes 23-foot wiring harness with UV coated jackets
- VOLTAGE : 12 volts
- MIRROR LIGHTING TYPE : LED
- COVER INCLUDED : 1 12V LED Trailer Light Kit
- FOLDING : No
- MANUFACTURER PART NUMBER : 70205
- PRODUCT DIMENSIONS : 12 x 11.3 x 3.7 inches
- ITEM WEIGHT : 2.56 pounds
- MODEL : 70205
- BRAND : MaxxHaul
- SHIPPING WEIGHT : 2.56 pounds
MaxxHaul
- Trailer light kit for under 80" and Complies with DOT standards
- Kit includes stop, tail, turn signal lights, two amber clearance lights and wiring harness
- 25' split Y-style harness and 4' 4-pole color coded copper wires
- Large 4.5" x 5" lenses and includes license plate light and bracket
- Includes 23-foot all-copper wiring harness with UV coated jackets
- VOLTAGE : 12 volts
- COVER INCLUDED : 12V Trailer Light Kit
- FOLDING : No
- MANUFACTURER PART NUMBER : 70094
- ITEM WEIGHT : 2 pounds
- MODEL : 70094
- BRAND : MaxxHaul
- SHIPPING WEIGHT : 2.55 pounds
- PACKAGE DIMENSIONS : 11.5 x 7.2 x 4.6 inches
EXCOUP
- Improved LED lights for truck bed - The width of wire is increased, more sturdy and durable, extended the life of truck bed lights.
- EXCOUP truck bed lighting - 8 pods truck bed lights, 48 super bright SMD LEDs. The thickness of a pod is only 0.2in. Each truck bed light strand includes about 23in of wire between each pod. There are also 21ft of power wire.
- Waterproof truck bed led lights - With IP67 waterproof rating. The led lighting kit won't stop working even in bad weather conditions .
- Covenient truck bed light kit - Allowing you to work or do other things after dark without having to hold a flashlight or plug in a portable light.
- Easy to use - On / off switch, you could control the brightness entire of your truck bed with a small switch. ★To show our commitment to quality, the truck bed lights include a manufacturer's warranty that covers defects. This warranty is non-transferrable and only valid to the original buyer for purchases made directly from EXCOUP when purchased on Amazon.
- FOLDING : No
- MANUFACTURER PART NUMBER : EXCAUTOJK002-P
- PRODUCT DIMENSIONS : 330 x 1.5 x 0.2 inches
- ITEM WEIGHT : 10.4 ounces
- BRAND : EXCOUP
- SHIPPING WEIGHT : 10.4 ounces
- OEM PART NUMBER : EXCAUTOJK002-P
CZC AUTO
- Left trailer light have 7 function : Stop/Turn/Tail/Rear reflector/side reflector/side marker light/license plate light, Right trailer light have 6 function : Stop/Turn/Tail/Rear reflector/side reflector/side marker light
- All diodes are LED ,NOT any Bulb !Left Light have 19 diodes : 12 diodes front ,4 diodes on side marker and 3 white diodes facing down for license Plate illumination ,Right Light have 16 diodes : 12 diodes front ,4 diodes on side marker
- Super High visibility and Longer Lifetime LED advantage！Complies with DOT standards
- Easy to install，The distance of two studs bolts is standard 2” ， Direct replacement for your original incandescent bulb unit
- Please note, these trailer lights are sealed from PCB, not the housings. You may found there are gaping holes in the housings. As the housings are not sealed, there will be water flows in when use in water, and the gaping holes are made for the water to flow out.
- VOLTAGE : 12 volts
- FOLDING : No
- MANUFACTURER PART NUMBER : 101001W
- ITEM WEIGHT : 1.6 pounds
- BRAND : CZC AUTO
- SHIPPING WEIGHT : 1.6 pounds
- PACKAGE DIMENSIONS : 7.3 x 5.6 x 4.8 inches
CZC AUTO
- CZC AUTO 12V Submersible LED Trailer Light Kit includes 2 combination stop, tail, turn signal lights, two amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware bag.UPDATE ON 9TH,JUNE,2019.FOR BETTER SERVICE ON OUR CUSTOMER,WE IMPROVED THE WIREHARNESS TO 18GAUGE 100% COPPER WIRE FOR WATERPROOF USE
- Waterproof and Submersible Feature and Testing（2nd Image）：We placed light underwater for 3 hour by 3 times each day ,total 5 days,the light worked great underwater! The lights are definitely waterpoof and submersible.Please make sure wires connect correctly and no electronic short before marine/underwater
- Side lens Light and Side marker lights are ALL LED as well ,NOT any incandescent Bulb! Super bright LED quality ,Complies with DOT standards
- Application for under 80 Inch width towing vechile,like boat trailer truck snowmobile,etc. Please note, these trailer lights are sealed from PCB, not the housings. You may found there are gaping holes in the housings. As the housings are not sealed, there will be water flows in when use in water, and the gaping holes are made for the water to flow out.
- CLIENT SUPPORT AND SOME NEW ARRIVAL: Please feel free to contact us at first if there is any problem when you receive or use our products. We are always here to support you. In the product description, there are some new arrivals with very good price you may interest
- VOLTAGE : 12 volts
- FOLDING : No
- MANUFACTURER PART NUMBER : 101001
- PRODUCT DIMENSIONS : 11.2 x 3.9 x 6.3 inches
- ITEM WEIGHT : 2.86 pounds
- BRAND : CZC AUTO
- SHIPPING WEIGHT : 2.86 pounds
Kohree
- UPGRADE TRAILER LIGHT: Come with additional atomization strip, Kohree submersible brake tail light kit has superior visibility and faster upon activation than other rectangle led trailer taillights. No glare LED, maximizing light output and giving motorists behind you a better indication of when you're braking, turning or reversing and thus boosting their response time.
- SEALED WATERPROOF TRAILER LIGHT: No screws on the lamp surface IP68 waterproof, built in epoxy encased electronics and a sonically sealed body to prevent water intrusion and definitely submersible. Also, it can effectively resist corrosion of sand, dust, dirt, snow and other horrible weather.
- SURFACE MOUNT: With diodes soldered directly to the surface of a circuit board instead of attached with wires in the drilling-hole board, Kohree 12V led trailer lights protect LEDs from shock and vibration better than through-hole technology. Simply to use.
- DOT APPROVAL: Kohree hola boat trailer light kit gives your truck a distinctive look and completely street legal, perfect replacement low profile trailer lights for under 80 Inch width towing vehicle, like boat trailer, RV, tractors, canoes, truck, trailer, bus, Lorry, Van, caravan, snowmobile etc.
- FULL SERVICE TRAILER LIGHTS KIT: This utility led trailer light kit has everything you need: 1X Rectangle LED combination stop turn tail light,1X Rectangle LED combination stop turn tail light with license illuminator, 2X amber LED marker lights ,25-ft wiring harness,license plate bracket and mounting hardware.
- MANUFACTURER PART NUMBER : HY1028-HM
- ITEM WEIGHT : 3.46 pounds
- BRAND : Kohree
- SHIPPING WEIGHT : 3.46 pounds
- PACKAGE DIMENSIONS : 9.9 x 8.2 x 4.2 inches
ONLINE LED STORE
- A MUST FOR 80" OR WIDER TRAILERS - Trailers measuring 80" or wider require identification lights for additional visibility; mount this clearance light bar on the top of your truck/trailer or between the taillights to draw extra visibility to your wide trailer for added on-road safety.
- DOT-CERTIFIED REFLECTIVE LENS - Unlike cheaper, inferior quality ID bars, our unit boasts a DOT FMVSS-108 rated reflective lens design compliant with all relevant laws and regulations.
- IP67 SUBMERSIBLE RATED - Waterproof and entirely-submersible for unparalleled all-weather usability; mounting bracket features water drainage notch for added protection.
- SOLID CONSTRUCTION - Black bracket is made of long-lasting stainless steel, NOT substandard plastic like other light bar brackets. Stainless hardware included.
- STRAIGHT-FORWARD INSTALLATION- Mounting bracket features notches on its short sides for easy wire routing; positive input wire and ground wire are attached; mounts on 8.5" centers.
- MANUFACTURER PART NUMBER : CAZLEDTBL1515-RD
- PRODUCT DIMENSIONS : 14.2 x 1.4 x 1.4 inches
- ITEM WEIGHT : 5 ounces
- BRAND : ONLINE LED STORE
- SHIPPING WEIGHT : 8 ounces
MaxxHaul
- Features two 4-1/2" diameter red brake light on one side and amber flasher on the other side
- Heavy duty magnetic base with 11-lb pull keep lights stay in place
- Includes 20-ft color coded wiring harness with standard 4-flat wire vehicle trailer connector
- Ideal for all towing applications under 80" wide
- DOT certified
- COVER INCLUDED : 1 magnetic towing light kit
- MANUFACTURER PART NUMBER : 80778
- ITEM WEIGHT : 1 pounds
- MODEL : 80778
- BRAND : MaxxHaul
- SHIPPING WEIGHT : 1 pounds
- PACKAGE DIMENSIONS : 12 x 5 x 4 inches
- EXTERIOR : Polished
Partsam
- Application: Universal for Trucks, trailers under 80", tractors, semi-trailer, Dump Truck, bus, boat, special vehicle,etc
- 15 Diodes LED Combination stop turn tail side marker light w/reflector-Curb side; Passenger Side Serves 6 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector;
- 19 Diodes LED Combination stop turn tail side marker light w/reflector-Street side with license illuminator; Driver Side Serves 7 functions: Stop light, Turn signal light, Tail light, Rear reflex reflector, Side marker light, Side reflex reflector, License plate illuminator;
- Add or upgrade the lights on boat, snowmobile, camper, or utility trailer; High visibility safety lights are EASY TO INSTALL and the wiring details are in the description part; completely sealed and waterproof, its acrylic len are engineered to block water out and ensure the circuits are protected. Super bright LED lights provide maximum visibility and safety. Fully operable in inclement weather, these heavy duty trailer lights are tough and durable for the long term
- Package include: 1 Pairs Lights + 2 Gaskets + 4 Screws 【Tips】 PARTSam is the ONLY authorized seller of Partsam products.If you receive a product that does not arrive branded PARTSam on or not in a PARTSam packaging with logo, please contact that seller for a refund as it is a counterfeit PARTSam product.
- VOLTAGE : 12 volts
- FOLDING : No
- MANUFACTURER PART NUMBER : GTCV-0475639698
- ITEM WEIGHT : 1.23 pounds
- MODEL : Under 80" Marine Square Red/White LED Trailer Lights
- BRAND : Partsam
- SHIPPING WEIGHT : 1.23 pounds
- PACKAGE DIMENSIONS : 6.8 x 5.8 x 5.1 inches
- SAFETY RATING : DOT Certified
- BULB TYPE : LED
- CAPA CERTIFIED : DOT Certified
- VEHICLE SERVICE TYPE : Universal for Under 80" Inch width towing vehicle, like truck, trailer, tractor，semi-trailer，Dump Truck，boat, bus, Lorry, Van, caravan, snowmobile, Camper, RV.etc
